S-70

S-70 Maintenance docking system

Electrical, lights & pneumatic installation

This option has a single point electrical connection on each stand, connected to a numerous electrical connection around the stands. It gives the mechanic easy access to electrical power as they are working around the helicopter. It adds lighting under both side stands and railing to improve the working conditions for the mechanic. The customer may choose from 220V or 110V Installation.

Docking system accessories

Surface treatment

All ground support accessories are powder coated red to give durability and a nice finish.

Pneumatic installation

This option has a single point pneumatic connection on each stand, connected to a numerous pneumatic connection around the stands. It gives the mechanic easy access to air as they are working around the helicopter.

Electrical installation

This option has a single point electrical connection on each stand, connected to a numerous electrical connections around the stands. It gives the mechanic easy access to electrical power as they are working around the helicopter. It adds lighting under both side stands to improve the working conditions.

Storage cabinet

The storage cabinets are designed to hold fairing screws, removed component etc. They
slide over the side rails and can be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

Working table

The working tables are designed to hold tools, removed component etc. They slide over the
side rails and may be position where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

PC table

The PC tables are designed support a PC for the mechanic during his work. They slide over
the side rails and may be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

Paper dispenser

The paper dispenser is designed to support paper rolls. They slide over the side rails and
may be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

Container for cleaning rags

The container for rags is designed to support paper rolls. They slide over the side rails and
may be position where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether

S-70 Ground Support Equipment

General description operation:

Accessories are usable for maintenance and line maintenance docking system.

Surface treatment

All ground support accessories are powder coated red to give durability and a nice finish

Certificate

All equipment as slings etc., will be delivered with a certificate.

ATA 10 Parking and Mooring

MGB/Engine/ Top deck area cover

This cover is designed to protect the complete top deck area against rain, snow and sand
when the helicopter is parked outside.

Illustration are on a S-92, same principle on the S-70

ATA 25 Equipment furnishing

Cabin cargo loading System

The cabin cargo loading system is designed to support loading of cabin cargo. It has a roller/ball concept that makes it easy to load pallets/ baskets into the cabin. It is rated for loads up to 500 kg./ 1000 lbs.

 Illustration are on a S-92, same principle on the S-70B

ATA 25 Rescue Hoist Cable Wash Trolley

The Rescue hoist-cable wash trolley is designed for safe and easy washing of rescue cable
after use. The trolley consists of a wash basin and a drum that reels the cable. The drum is equipped with adjustable braking system that ensures correct tension when
spooling the cable.

Main rotor pylon forward sliding fairing sling

The main rotor sliding fairing sling is designed to support during removal/installation of the
fairing.

ATA 62 Main rotor

Main rotor blade trolley

The main rotor blade trolley is designed to support all four main rotor blades when they are removed from the helicopter.

ATA 71 Engines

Engine stand

The engine stand is designed to support the engine when it is removed from the helicopter.

Engine maintenance stand (adjustable height)

The engine stand is designed to support the engine when it is removed from the helicopter and when conduction maintenance on the engine. The height can be adjusted to ease the access and working conditions for the mechanic.