AS 332 L2

AS 332 L2 Maintenance docking system

Line maintenance docking system

This docking system supports line maintenance activities on the AS 330. It is produced in lightweight aluminum and the floor have an antiskid surface. All edges against the fuselage have a rubber protection band to avoid any harm to the helicopter. There is a variety of accessories to choose from as described in this brochure.

Electrical, lights & pneumatic installation

This option has a single point electrical connection on each stand, connected to a numerous electrical connection around the stands. It gives the mechanic easy access to electrical power as they are working around the helicopter. It adds lighting under both side stands and railing to improve the working conditions for the mechanic. The customer may choose from 220V or 110V Installation.

Docking system accessories

Surface treatment

All ground support accessories are powder coated red to give durability and a nice finish.

Pneumatic installation

This option has a single point pneumatic connection on each stand, connected to a numerous pneumatic connection around the stands. It gives the mechanic easy access to air as they are working around the helicopter.

Electrical installation

This option has a single point electrical connection on each stand, connected to a numerous electrical connections around the stands. It gives the mechanic easy access to electrical power as they are working around the helicopter. It adds lighting under both side stands to improve the working conditions.

Storage cabinet

The storage cabinets are designed to hold fairing screws, removed component etc. They
slide over the side rails and can be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

Working table

The working tables are designed to hold tools, removed component etc. They slide over the
side rails and may be position where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

PC table

The PC tables are designed support a PC for the mechanic during his work. They slide over
the side rails and may be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

Paper dispenser

The paper dispenser is designed to support paper rolls. They slide over the side rails and
may be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.

Container for cleaning rags

The container for rags is designed to support paper rolls. They slide over the side rails and
may be position where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether

AS332 L2 Ground Support Equipment

General description:

Accessories are usable for maintenance and line maintenance docking system.

Surface treatment

All ground support accessories are powder coated red to give durability and a nice finish.

Certificate

All equipment like slings etc. is delivered with a certificate.

ATA 25 Equipment furnishing

Cabin cargo loading system

The cabin cargo loading system is designed to support loading of cabin cargo. It has a roller/ball concept that makes it easy to load pallets/ baskets into the cabin. It is rated for loads up to 500 kg/ 1000 lbs.

ATA 62 Main rotor

Main rotor blade trolley

The main rotor blade trolley is designed to support all six main rotor blades when they are
removed from the helicopter.

Main rotor blade sling

The main rotor blade sling is designed for removal/installation of main rotor blades. A clamp type sling will close automatically around the blades as the sling is hoisted up.

ATA 71 Engines

Engine stand

The engine stand is designed to support the engine when it is removed from the helicopter.

Rescue hoist cable wash trolley

The Rescue hoist-cable wash trolley is designed for safe and easy washing of rescue cable after use. The trolley consists of a wash basin and a drum that reels the cable. The drum is equipped with adjustable braking system that ensures correct tension when
spooling the cable.