AW 189
Maintenance docking systems & ground support equipment.
This docking system supports all maintenance activities on the AW-189. It is produced in lightweight aluminum and the floor have an antiskid surface. All edges against the fuselage have a rubber protection band to avoid any harm to the helicopter. There is a variety of options to choose from as lighting, pneumatic and other accessories as described in this brochure.
Key features
- Antiskid surface and rubber fender protection
- Heavy duty wheels with brakes
Swivel wheels with brakes, 600kg load per wheel. - Removable / telescope railing
In some places, it is required to be able to lower the railing. - Electrical, lights & pneumatic installation
- Maintenance docking system design and load rating
Design for 200 kg/m2
Click for a larger image
AW 189 Maintenance docking system
| Part Name | Maintenance docking system |
|
Part Number |
Consist of:
|
| AMM Reference | N/A |
Electrical, lights & pneumatic installation
This option has a single point electrical connection on each stand, connected to a numerous electrical connection around the stands. It gives the mechanic easy access to electrical power as they are working around the helicopter. It adds lighting under both side stands and railing to improve the working conditions for the mechanic. The customer may choose from 220V or 110V Installation.
Docking system accessories
Surface treatment
All ground support accessories are powder coated red to give durability and a nice finish.
| Part Name | Pneumatic installation |
| Part Number | RA-AW-101-DSA-2095-PN-0 |
| AMM Reference | N/A |
Pneumatic installation
This option has a single point pneumatic connection on each stand, connected to a numerous pneumatic connection around the stands. It gives the mechanic easy access to air as they are working around the helicopter.
Electrical installation
| Part Name | Electrical installation |
| Part Number | RA-AW-101-DSA-2094-EL-0 |
| AMM Reference | N/A |
This option has a single point electrical connection on each stand, connected to a numerous electrical connections around the stands. It gives the mechanic easy access to electrical power as they are working around the helicopter. It adds lighting under both side stands to improve the working conditions.
Storage cabinet
| Part Name | Storage cabinet |
| Part Number | RA-DSA- 1990-0 |
| AMM Reference | N/A |
The storage cabinets are designed to hold fairing screws, removed component etc. They
slide over the side rails and can be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.
Working table
| Part Name | Working table |
| Part Number | RA-DSA- 1987-WT-0 |
| AMM Reference | N/A |
The working tables are designed to hold tools, removed component etc. They slide over the
side rails and may be position where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.
PC table
| Part Name | PC table |
| Part Number | RA-DSA- 1816-0PC |
| AMM Reference | N/A |
The PC tables are designed support a PC for the mechanic during his work. They slide over
the side rails and may be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.
Paper dispenser
| Part Name | Paper dispenser Holder |
| Part Number | RA-DSA- 1852-PD-0 |
| AMM Reference | N/A |
The paper dispenser is designed to support paper rolls. They slide over the side rails and
may be positioned where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether.
Container for cleaning rags
| Part Name | Container for cleaning rags |
| Part Number | RA-DSA- 1991-0 |
| AMM Reference | N/A |
The container for rags is designed to support paper rolls. They slide over the side rails and
may be position where most suitable. It is up to each operator to determine how many needed and how to utilize them. The recommendation is one on each side stand and one on the tail stand, three altogether
AW 189 Ground Support Equipment
General description:
Accessories are usable for maintenance and line maintenance docking system.
Surface treatment
All ground support accessories are powder coated red to give durability and a nice finish.
Certificate
All equipment like slings etc. is delivered with a certificate.
ATA 9 Towing
AW 139 Tow bar
| Part Name | AW189 Tow bar |
| Part Number | |
| MM Reference | 09-00-00 |
Tow bar for moving the helicopter on ground.
ATA 25 Equipment furnishing
Cabin cargo loading System
| Part Name | Cabin cargo loading system |
| Part Number | RA-GSE- 1885-0 Consist of : * 1 ea Hinged roller / ball board with support legs * 2 ea Sliding board * 2 ea roller segments * 2 ea aluminum pallet |
| MM Reference | 25 |
The cabin cargo loading system is design to support loading of cabin cargo. It has a roller /
ball concept who makes it easy to load pallets/ baskets into the cabin for to be strapped to
the cabin floor. Its rated for loads up to 500 kg./ 1000 lbs.
Rescue hoist cable wash trolley
| Part Name | Rescue hoist cable wash trolley |
| Part Number | RA-GSE-2071-1-RHC |
| MM Reference | N/A |
The Rescue hoist-cable wash trolley is designed for safe and easy washing of rescue cable after use. The trolley consists of a wash basin and a drum that reels the cable. The drum is equipped with adjustable braking system that ensures correct tension when
spooling the cable.
ATA 62 Main rotor
Main rotor blade trolley
| Part Name | Main rotor blade trolley |
| Part Number | |
| MM Reference | 62 |
The main rotor blade trolley is designed to support all four main rotor blades when they are
removed from the helicopter.
